high frequency filter: AC noise filter to reduce radio frequencies and electromagnetic interference (RFI/EMI) >20 dB, 1.5-20 MHZ
overvoltage protection: yes
total load: 10 A
Rack lighting: no
Displays: "Protection OK" display on front panel informs about protected equipment
Dimensions W/H/D: 483 x 45 x 190 mm
Weight: 2,3 kg
The Furman M-10X Power Conditioner is the perfect low-cost AC power solution for any rackmount audio system. The Furman M-10X has ten switched AC outlets in the rear panel to power and protect all your equipment with up to a 10-amp load.
The Furman M-10X protects your delicate electronic equipment by combining high voltage varistor (MOV) surge and transient suppressors. The fast-acting suppression circuit quickly responds and clamps transient voltages to safe levels. An RFI/EMI interference filter works to prevent noise from fluorescent lights, certain dimmers, radio transmitters, and similar sources of electronic pollution from contaminating the AC line and from there, leaking into sensitive audio, video, or computer circuits.
FURMAN M10X E MERIT SERIES POWER CONDITIONER FEATURES Filtration of noise from radio frequencies and electromagnetic interference. Standard level of surge suppression. 10 rear panel outlets, one front panel outlet. Sturdy one rack space design. 10-amp capacity with circuit breaker.
FURMAN M10X E MERIT SERIES POWER CONDITIONER SPECIFICATIONS Maximum Output Current: 10 amps. Operating Voltage: 230VAC 50Hz. Spike Protection Mode: Line to neutral. Peak Impulse Current: 12,000 amps. Maximum Continuous Operating Voltage: 650 Volts. Noise Attenuation: Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz. Dimensions (inches, HxWxD): 1.75 x 19 x 7.5. Weight: 2.3 kg.